How to assemble 002 Shaker Chair / シェーカーチェアの組み立て方

Leave a comment
002 Shaker, circa 1820, Assembly Hints & Tips

shaker complete
This is the 002 Shaker Chair set after completion.  Here’s how to build it…

この写真はシェーカーチェアを組み立て終わったところです。このキットの組み立て方を順を追って説明します。

shaker parts

There are three cards in the package, together with assembly instructions.  Detach all parts of the chair and candle holder from the second card, using a craft knife/scalpel – connections are indicated by little triangles.

この3枚のカードと組み立て説明書が1セットです。まず、レーザー加工されている厚紙から、小さな三角形で示している「つなぎ箇所」をカッターなどで切り落とします。

02

03
Fold along engraved lines and shape into a chair.  First, assemble front legs – apply glue to the hatched area, with a pointy stick (such as a cocktail stick) and press firmly in position.

レーザーで入っているラインを折って椅子の形に近づけ、まず前脚を作ります。斜線の部分につまようじの先など細いもので糊をつけ、前足と重ねて押さえ、貼付けます。

04-2

05
Apply glue between two layers of back, and back legs, press firmly to stick.

次に背もたれと後ろ足の紙が重なる部分全体に糊をつけ、張り合わせて押さえます。

06-2

07

08
The Shaker chair is complete.  Too easy!?

Next is the wall and floor – it is best to use the corner of an object such as a table edge or piece of wood, and a ruler,  to fold lines cleanly.

シェーカーチェアの完成です。カンタンすぎ、ですね?

次は壁と床です。エッジの立った角材などと定規を組み合わせて使うと、折り線がきれいに仕上がります。

09

With the printed side of the WALL facing upwards, fold the bottom of the wall DOWN, as in photo above.

With the printed side of the FLOOR facing upwards – fold UP along all three dotted lines.  Fold up two small tabs as well.

壁と床のカードを印刷面を上にして置き、壁の下部は山折り(うしろへ)、床の後ろになる部分は3回、谷折り(手前に)します。後でさし込みになるツノも2カ所、手前に折り上げます。

10

11

12

13-2
Apply glue to the hatched area of floor part.  Then turn the wall part back-side facing upwards and glue the three ‘tongues’ of the floor at the arrowed folding line so that the floor is now attached to the wall.

床のパーツの斜線が入った3箇所に接着剤をつけます。壁を裏返し、裏に見える折り線(矢印の場所)に合わせて、床部分の3つののりしろを貼り合わせます。

14-2-2
Insert the two tabs into the slots below the front of the wall – it is best to insert both at the same time.  Adjust the back to make the wall and floor at right-angles to each other. If you want, you can glue at the join of back and wall for a permanent display, or leave without glue should you wish to flat-pack the interior in the future.

床パーツのツノを、壁の下部のカットに2つ同時にさし込みます。壁と床をぴったり合わせ、後ろに出来た小さな正方形で調整して直角にします。

15

16

17
Press the two cut-out wall pegs from behind using a pointy tool.  When you hang the candle holder on the peg, the diorama is complete!

つまようじの先など細いものを使って、壁の切り込みを後ろから折り出すと、フックができます。キャンドル立てを掛けたら、出来上がりです!

18

19

20

 

Posted by

A furniture, product and interior designer, leading t.n.a. Design Studio, based in East London. An weekend cyclist and stamp collector.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s